AM Series Dehumidifyers
Adsorption Dryers for Dehumidifying Atmospheric Air.
The Goldcrest AM Series of dehumidifying dryers are constructed using the principles of adsorption. This allows reliable dehumidification even with low air temperatures on the inlet of the machine.
Karalex AM1250 Assembled 3
The AM Series machines are constructed using 4 absorbsion vessels
where 2 are in the absorbsion phase whilst the 2 remaining are in the
cooling and regeneration phase.
The AM Series of machines have a powder coated finish to exterior
surfaces with stainless steel utilised on the internal surfaces. Moving
parts within the construction have been reduced to two permanently
connected disc valves. The valves are rotated using a directly coupled
gear motor and distribute the air into the four adsorber vessels. The
valves are turned ¼ revolution every 15 minutes approximately.
The AM Series is supplied with a specially designed timer that controls
the valve change and engagement of the regeneration heating. The
machines are supplied with all safety equipment and come prepared to
be integrated with external hygrostat operation.
The AM Series machines are supplied to be floor mounted and come complete with all
necessary frames for installation. The machines are supplied as standard with a built in fan, inlet air filter and an outlet flange to allow connection to an air distribution system if required.
Karalex AM 63 - 125 Assembled
AM Series Specifications
The capacities are based on:
Type Dried air volume Water removal Max. Power. Heaters
AM 63 63 m3/hr 0.25 kg/hr 0.65 kW
AM 125 125 m3/hr 0.55 kg/hr 1.10 kW
AM 250 250 m3/hr 1.09 kg/hr 2.20 kW
AM 650 650 m3/hr 4.29 kg/hr 7.95 kW
AM 1250 1250 m3/hr 8.50.6 kg/hr 15.0 kW
AM 2500 2500 m3/hr 17.0 kg/hr 30.0 kW
Inlet conditions Temp. 20 C. Dew Point +12 C.
Outlet Conditions Temp. 40 C. Dew point + 2 C.
Dehumidification Delta X = 3.5 – 6.5g H2O/kg Dry air
Specific Energy Consumption. 1.40 kW / kg H2O.
Pressure loss P @ V Nm3 / h less than 900 Pa
07.30 - 18.00 GMT
Goldcrest Engineering Technologies Limited
Unit 15 St John's Way
St John's Business Estate
+44(0) 1366 383398
+44 (0) 1908 613121
+44 (0) 1865 600720
+44 (0) 1223 969596
+44 (0) 7588965838
You can also use our contact form.
9Goldcrest has recently invested in the latest Hurco Winmax CADCAM Offline Programming Software to offer its customers faster turn arounds and competative prices.
We have also recently expanded our operations by setting up a factory in Turkey specialising in large volume turning and milling and being on the edge of europe are able to offer our customers value for money as well as transport solutions in the form of Road, Sea and Air for rapid turn arounds.
Latest News:- We now have our own E Commerce Webstore which can be found at the following address
Goldcrest Updates can also now be found on Twitter at
UPDATE:- GETL has just completed its relocation to Downham Market Norfolk
Goldcrest has recently invested in a Hurco VM1 Mill to expand on its Milling Capacity